How should server cases and industrial cases be maintained on a daily basis?

Server chassisIt is mainly used in industrial production. It is inevitable that malfunctions will occur during the entire application process. No electronic product can guarantee that it will never have problems, but everyone can improve it through maintenance in daily lifeIndustrial chassisThe application cycle time。

There are a large number of electronic components inside a 1U server case, and the case bears a heavy load. Some 1U server cases will undergo significant deformation after being placed on the sound card rack for a period of time. The vibration during the transportation process will also cause significant deformation of the case, which will cause relatively serious damage to the computer motherboard and other electronic components inside the case.

When choosing a server case for industrial production, select one with sufficient space to facilitate the expanded use of the Internet.

It is clear that there is sufficient indoor space to accommodate a large number of computer hard drives and other external devices. Check the interior of the computer case to ensure there are no sharp edges.

This is crucial for the safety of professional technicians and to prevent the cables from being accidentally disconnected during future upgrades.

The chassis should also enable maintenance staff to easily access the internal components for future upgrades or troubleshooting. The regularity of stress, strain and deformation distribution in the 1U server chassis is of crucial practical significance for the reliability design of the chassis structure, increasing the service life of the chassis and reducing the failure rate of network servers.

At present, the use of resistance strain gauge electrical measurement method for strain force measurement is a common way to detect and analyze the reliability of engineering project products, and is widely used in every engineering project industry.

1. The entire industrial chassis has no electricity. This is actually a relatively simple malfunction. Generally, in industrial production, there are two types of power supplies for industrial control computer cases with screens: the internal power supply and the external power supply of the equipment. The external power supply of the equipment is more common.

No matter what kind of power supply it is, its structure is much simpler compared to the power supply of CRT industrial control cases with screens. The vulnerable parts are all small components, such as fuse tubes, input inductors, switch tubes, voltage stabilizing tubes, crystal diodes, etc.

A relatively rare malfunction is the power failure caused by the CPU of the computer motherboard. In fact, the basic principle of this situation is also very simple. It is through the keyboard to the CPU, and then the CPU outputs a control signal to drive the power and convert the integrated circuit chip to work.

2. Problems such as bright or visible wires on industrial chassis display screens are usually caused by faults in the LCD display screens.

The bright line fault is usually due to problems with the wires connected to the LCD screen itself, while the exposed line is generally caused by an electrical discharge from the screen itself. Most of the above two problems result in the industrial control computer case with a screen being sentenced to a standstill and has no repair value because the price of a screen is too high.