What is the reason for the loudness of the server chassis?

Generally speaking, there are two reasons. The first is the high fan speed ratio, which causes a lot of noise. Another reason is that the computer has been used for too long, and too much dust is deposited, which causes the fan to rotate not smoothly, which causes noise.

This is the most common reason for the loudness of server chassis. For this situation, you can replace the fan with a noise-reducing fan with oil content, and choose a fan with a lower speed ratio to achieve the actual effect of noise reduction.

For the second situation, the case must be opened, and the heat pipe radiator, motherboard, and CPU must be removed simply.

First, you need to unplug all server cables, use a screwdriver to unscrew the rear camera control panel screws of the chassis, remove the control panel, open the main box, look for the rotating heat pipe radiator, and then remove the fan screws. fan.

While holding the fan tightly, use a brush or discarded soft-bristled toothbrush to remove it immediately. Be careful not to wash by hand.

In the end, it is to remove the dust on the motherboard and CPU, brush it with a small soft brush, and then use a large gear hair dryer to blow the dust back and forth, and cooperate with the brush to remove it, so that the CPU is brighter.

I firmly believe that based on the above two methods, everyone should be able to deal with the problem of why the chassis is loud. If it is a customized I chassis with a different internal structure, it is more important to ask the 1U server box manufacturer to solve it.

The role of the server considers many daily tasks. In addition, it must have several connections. The workstation does not need to do that. It only performs daily tasks specific to program operation and can also be used as a separate machine.